GeekVape M Replacement Coils

Description

Geekvape M Replacement Coils

Geekvape M Series Coils are the genuine replacement mesh coils for the Z Max Tank, sold in packs of five and built for sub-ohm DTL vaping across a 55W to 100W range. All four builds use mesh construction with a large heating surface, which is what produces the flavor intensity and cloud volume the Z Max is known for while resisting the dry hits that kill cheaper coils early. The range covers four distinct configurations: the 0.3ohm Dual Coil at 55-65W for the most restrained output and the best battery life, the 0.14ohm Single Coil at 60-80W for a balance of flavor and vapor, the 0.2ohm Triple Coil at 70-85W for a step up in warmth and density, and the 0.15ohm Quadra Coil at 85-100W for maximum cloud production. Installation is press-fit – the coil pushes into the tank base with no threading and no tools. These require high-VG e-liquid, ideally 70/30 or higher, since thinner blends cannot keep up with the wicking demand at these wattages.

WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.

Key Features

• 5-Pack – five coils per pack
• Four Resistance Options – 0.14ohm, 0.15ohm, 0.2ohm, and 0.3ohm
• Mesh Construction – large heating surface for bold flavor and dense vapor
• 55-100W Range – covers restrained sub-ohm through to full cloud chasing
• Press-Fit Installation – no threading, no tools required
• Multiple Coil Configurations – single, dual, triple, and quad builds
• Extended Coil Life – mesh design resists dry hits and burnout
• Z Max Tank Compatible – designed specifically for this tank

Specification Table

What’s Included

• 5 x Geekvape M Series Replacement Coils

Choosing Your Resistance

• 0.3ohm M Dual Coil (55-65W) – lowest power draw in the range, cooler vapor and the best battery life
• 0.14ohm M Single Coil (60-80W) – balanced flavor and vapor across a wide usable wattage window
• 0.2ohm M Triple Coil (70-85W) – warmer output with noticeably denser clouds
• 0.15ohm M Quadra Coil (85-100W) – maximum vapor production, requires a mod that can sustain 100W

FAQ

Q: Which tank do these coils fit?
A: The Geekvape Z Max Tank. M Series coils are proprietary to that tank and will not fit the Z Sub-Ohm, Z Fli, or any pod system.

Q: Are these the same as B Series or Z Series coils?
A: No. Geekvape runs several separate coil platforms. B Series coils are for pod mods like the Aegis Hero and Aegis Mini. Z Series coils fit the Z Sub-Ohm and Z Fli tanks. M Series fits only the Z Max. They are not interchangeable.

Q: Which resistance should I choose?
A: Start with the 0.3ohm at 55-65W if you want longer battery life, or the 0.14ohm at 60-80W for a balance of flavor and vapor. Move to the 0.2ohm or 0.15ohm only if your mod can comfortably sustain 85W or more.

Q: What e-liquid should I use?
A: High-VG freebase at 70/30 or higher, in low nicotine strengths such as 3mg or 6mg. These are sub-ohm coils running at high wattage – nic salts would deliver far too much nicotine per puff.

Q: How do I install a coil?
A: Press-fit. Push the coil into the base of the tank until it seats. No threading and no tools needed.

Q: Do I need to prime a new coil?
A: Yes. Drip e-liquid directly onto the cotton ports, fill the tank, and let it sit for at least 10 minutes before firing. At these wattages, skipping the prime will burn a coil on the first pull.

Q: How long does a coil last?
A: Typically one to two weeks depending on wattage and e-liquid. Running at the top of a coil’s wattage range shortens its life, and sweetened or dark e-liquids gunk coils considerably faster.